Electric Fireplace Wall Hanging Ideas
The wall-mount electric fireplaces are ready to use straight from the box. These fireplaces can be ideal for adding the ambience of your home without the need for renovations or venting.
They are typically heavy and require careful installation. Follow these steps to hang your new electric fireplace properly.
1. Connect the Brackets
A wall-mounted or recessed electric fireplace instantly improves the look of any room. It's the ideal solution for homes without an existing fireplace opening or for apartment residents.
First, decide where you'll place your new electric fireplace. You should select a spot that isn't susceptible to moisture and is at least just a few feet from furniture and drapes. Mark the wall with layout marks to mark the top and bottom plates of the fireplace frame.
Use a tool such as a drill to make exploratory holes into the wall, examining for studs using a stud detector and marking on the drywall for locations of the fireplace mounting brackets. Then, you can build the wall or patch and paint the drywall to prepare it for fireplace installation.
Depending on your chosen wall-mounted fireplace, you could be required to install the screen and firebox as one unit or separate them with a wall bracket. If you're not sure about your capability to complete this task employ a general contractor or a seasoned carpenter.
You can find an installation template that comes with all electric fireplaces. However it is recommended to keep a spirit level handy and a pencil to mark the exact spot where the wall brackets will be placed. Utilize the template to ensure that the power cable of the fireplace is able to connect to an outlet nearby to connect it.
Install the drywall as clean and as flush as is possible to give the fireplace a clean appearance. Attach a piece of trim to the bottom of the frame, and then sand and paint the entire frame to give it a finished appearance.
electric fireplaces wall mounted -mounted electric fires have hooks or slots on the back of the unit, which you insert into slots or hooks on the mounting brackets. Make sure that the slots and hooks are aligned prior to when you connect the fire to the wall brackets. Once Electric wall mount fireplace is installed you can add other elements such as driftwood logs, crystal embers or decorative rocks.
2. Check the Bottom Bracket
The space above the mantel, fireplace, or chimney breast is the perfect spot to hang artwork. But, there is a fine line between an artistic arrangement and one that distracts from the overall appearance of the fireplace design.
A common rule of thumb is that a picture should not exceed at least 80% of the length of the mantel or fireplace it's placed on. This will keep it proportionate and will make it look nice on the wall. This guideline could be influenced by other ornaments and decorative pieces on the mantel.
If you're planning to put a picture above your electric fireplace, it's important that the frame is made of glass or other material that can withstand high temperatures. If you're not sure whether the frame is suitable, a quick test using a temperature-sensitive cloth will show whether the frame is suitable for this type of installation.
The risk of damaging artwork due to smoke or stray heat is a common issue when displaying artwork over a fireplace. This is not an issue with a wood- or gas-powered fireplace. However, if you plan to install an electric wall fire, it's important to check the instructions of the manufacturer.
Most electric fires come with an installation bracket that can be attached to the wall using either hanging screws or wall-mounted fixing systems. It is recommended that you drill exploratory hole in a discrete area of the wall prior to mounting your electric fire. You can then use a pipe and cable finder to make sure there aren't any cables or pipes close to the location where you want to mount your fire.
If so, you could place your fire on the electrical socket or move it to another location. If you decide to move it, be sure that the power cable can reach the electrical socket. This is essential for older homes or those with walls that are solid. If you don't, your electric fireplace will not function effectively. Certain models have a template included that will show you the locations to drill holes to make the holes, while others require a spirit level and pencil to mark the appropriate locations on your wall.
3. Connect the Power Cord
If you've installed a recessed electrical fireplace, you might need to move the plug socket from the wall to behind the fireplace. This will give you an elegant look. Test the fireplace first to make sure it is operating properly.
The third method of mounting an electric fireplace is framing the room and then building it into the wall. This gives it a finished, traditional look and allows you to include a mantel. The owner's guide for your specific model will have details about framing, securing the fireplace, and wiring.
When you're ready to mount your new wall-mounted electric fireplace begin by marking the installation location with a pencil or marker. Use a carpenter's level to ensure that the installation area is level and flat. You can also employ a stud locater to mark the location of studs so that you know that you're drilling in an area that is safe.
Use the electric drill after having identified the location of installation to make holes for bracket screws or hanging screws. Make sure to follow the precise directions in the owner's guideline for this step, particularly in the case of installing the fireplace in drywall. If you are unsure what to do then you can ask an expert for assistance.
A cable organizer kit can be used to hide power cords. These kits typically include sleeves, clips, or boxes that can be used to bundle cables. You can make use of fish tape or wire snakes to guide the cables. If you do not want to cut the drywall, a powerbridge kit can offer a cleaner and safer connection.
You can also disguise cords with paintable wire covers or by attaching them to the wall. Keep the cover or tacks far from sources of heat. This will shield the cord from damage and also prevent accidental contact.
4. Connect the adapter
A wall-mounted electric fire place is a great choice to make for home improvements or those without the space or funds to build a gas fireplace. They are simple to hang and ready to use straight out of the box. They are an excellent alternative for those who want an elegant, modern look or warmth from a fire. They can be hung on any wall like art, and they are powered by a fan to provide heat.
Before beginning the actual installation process it is recommended to make a list of all the equipment and tools you will need. You can find the complete instructions on how to mount an electric fire in the user's manual. Some models will require you to attach the brackets directly to the wall. Other models may feature a mounting plate that slides into slots or hooks attached to the mounting brackets. It is essential to remove any combustible materials from the area where you are installing a recessive unit. In general you should keep these items at least 3 feet from the front of the fireplace.
After you've inspected all the components, you'll need to plug in your electric fireplace and ensure that it functions correctly. This is an important step to ensure the flame effect screen and heater operate as intended. This will give you a good idea of the final product's final position.
If you're confident that your electric fire is operating properly, you'll want to think about covering the power cord. This will help keep the final product neat. You can do this by using wire covers that are paintable or you can choose to install an outlet that allows you to place the cord behind the unit. This will provide a seamless finish to your fireplace.